关于正形置换多项式的注记

n为正整数，m为大于1的正整数，本文证明了当n≡0，1（mod m）时，F2^n上不存在2^m-1次正形置换多项式，并给出了该结果的几个推论：F2^n上不存在次数为3的正形置换多项式；n〉2时，F2^n上的4次正形置换多项式都是仿射多项式．     

An enantioselective Michael addition of malonate to nitroalkenes catalyzed by low loading demethylquinine salts in water

An enantioselective Michael addition of malonate to nitroalkenes is efficiently catalyzed by low loading demethylquinine salts in water; the yield range from 49% to 93% and the ee up to 90%.     

KrVI离子能级和振子强度的理论计算

利用组态相互作用理论和参数外推法,计算了KrVI离子4s~24p—4s4p~2、4s~24p—4s~24d和4s4p~2—4p~3跃迁的能级、谱线波长和振子强度。与已有实验结果比较表明:波长的理论计算值与观测值在0.7A内很好符合,振子强度的理论计算值较大的跃迁均是实验中观测到的跃迁。     

Low-energy ion-assisted control of interfacial structures in metallic multilayers

A molecular dynamics method has been used to simulate the argon ion-assisted deposition of Cu/Co/Cu multilayers and to explore ion beam assistance strategies that can be used during or after the growth of each layer to control interfacial structures. A low-argon ion energy of 5–10 eV was found to minimize a combination of interfacial roughness and interlayer mixing (alloying) during the ion-assisted deposition of multilayers. However, complete flattening with simultaneous ion assistance could not be achieved without some mixing between the layers when a constant ion energy approach was used. It was found that multilayers with lower interfacial roughness and intermixing could be grown either by modulating the ion energy during the growth of each metal layer or by utilizing ion assistance only after the completion of each layers deposition. In these latter approaches, relatively high-energy ions could be used since the interface is buried and less susceptible to intermixing. The interlayer mixing dependence upon the thickness of the over layer has been determined as a function of ion energy.     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007     

Effect of Pulse Temporal Profile on Autler-Townes Splitting in Photoelectron Spectrum

The effect of pulse temporal profiles on the Autler-Townes （AT） splitting in photoelectron spectra is theoretically studied by employing the time-dependent wave packet method for a rotational Na2 molecule. The AT splitting which results from the sufficient Rabi oscillations is affected by the pulse profile and molecular alignment. The AT splitting may be observed only by utilizing proper pulse profiles with a certain intensity.     

多级轴流压气机全工况特性计算

本文使用三维粘性流动计算软件Fine／Numeca,对某十五级轴流压气机进行了内流流场和全工况特性的数值计算尝试。分析了该压气机在设计工况和非设计工况的性能,同时把整机计算结果和前七级叶片的计算结果进行了比较。计算结果表明,当计算的级数较少时,目前的软件和硬件平台可以比较合理地预测压气机的全工况特性;而当计算的级数较多时,准确的数值模拟仍需要更为准确的多级模型和数值方法。     

军队院校开设数学实验课的实践与体会

介绍了我们开设数学实验课的实践,阐述了数学实验课的教学目的、教学内容和教学计划安排,分析了实际教学效果.     

叶片扩压器进口安装角对离心压缩机性能影响的数值与实验研究

对不同扩压器进口安装角下离心压缩机的性能进行了实验研究,并详细计算分析了相应的流场分布。分析表明, 不同的进口安装角对压缩机的流动有较大的影响,压缩机的性能曲线也有不同程度的左右偏移;进口处较大的正冲角和负冲角均会在扩压器叶片表面出现大尺度的分离涡团;在给定的流量工况下,应存在一个最佳的进口安装角,使得扩压器效率最高;设计工况下,最高效率所对应的冲角并非为零。     

模糊神经网络在复合地基沉降量预测中的应用

复合地基后期沉降变形对于建筑物设计及安全具有重要意义,针对通过长期沉降观测以得到复合地基的最终沉降需要耗费较多资源的问题,提出了一种基于模糊神经网络的预测方法.该方法考虑沉降变化过程有较大的随机性和模糊性,直接将样本数据进行模糊化,所得的模糊数代表了样本点集与控制点集中各分量之间的相关度,并依此建立模糊BP神经网络进行学习和估算.实验结果表明了该方法对沉降进行预测是可行与有效的,且在相对误差的有效控制方面优于BP网络方法与灰色方法.